Cluster Support

Owned by Doug Alguire (Deactivated)
Last updated: Sept 21, 2016
1 min read

The RapidHA Lighting firmware supports all of the mandatory clusters and attributes that are required to join a Daintree ControlScope or HA 1.2 network as a Dimmable Light:

  • Basic
  • Identify
  • Groups
  • Scenes
  • On/Off
  • Level Control
  • Commissioning
  • OTA Upgrade
  • ControlScope Ballast Configuration (Manufacturer-Specific cluster for operation on Daintree ControlScope networks)
  • Diagnostics


Additionally, the firmware supports the following features that are mandatory for operation on a Daintree ControlScope network and recommended for operation on any HA 1.2 or ZigBee 3.0 network:

  • Autojoin: upon powering on, the device will automatically seek out a network that is permitting joining
  • Factory Reset Button: the firmware has a specific pin allocated as a button input to enable the use to trigger a Factory Reset, which will clear all network settings and configuration parameters from the device