Versions Compared

Old Version 39

changes.mady.by.user Saman Sartipi (Deactivated)

Saved on

compared with

New Version 40

changes.mady.by.user Saman Sartipi (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Will return an exception if the client cannot connect to, or configure, the network interface.

Example

Code Block
//<!--
This is an example of a custom configuration file that will configure a RapidConnect zigbee module with the appropriatecustom clusters
//.
This can be used to define custom manufacturer specific clusters, or define which client clusters should pass through zigbee commands to be handled by GatewayClient callbacks.
-->
<?xml version="1.0" encoding="UTF-8"?>
<deviceConfig>
    <name>Combined Interface Coordinator</name>

    <deviceType>
        <reducedFunctionDevice>false</reducedFunctionDevice>
        <sleepy>false</sleepy>
    </deviceType>

    <endpoint id="1" profileId="0x0104" deviceId="0x0007" deviceVersion="1">
        <serverClusters>
            <cluster id="0x0000" />
            <cluster id="0x0003" />
            <cluster id="0x0006" passthroughAll="true"/> <!-- on/off -->
            <cluster id="0x0008" passthroughAll="true"/> <!-- level control -->
            <cluster id="0x000A">
                <attribute id="0x0002" type="0x2b" readable="true" writeable="true" reportable="false" />
                <attribute id="0x0003" type="0x23" readable="true" writeable="true" reportable="false" />
                <attribute id="0x0004" type="0x23" readable="true" writeable="true" reportable="false" />
                <attribute id="0x0005" type="0x2b" readable="true" writeable="true" reportable="false" />
                <attribute id="0x0006" type="0x23" readable="true" writeable="false" reportable="false" />
                <attribute id="0x0007" type="0x23" readable="true" writeable="false" reportable="false" />
            </cluster>
            <cluster id="0x0019" />
        </serverClusters>
        <clientClusters>
            <cluster id="0x0000" />
            <cluster id="0x0003" />
            <cluster id="0x0004" />
            <cluster id="0x0005" />
            <cluster id="0x0006" />
            <cluster id="0x0008" />
            <cluster id="0x0101" />
            <cluster id="0x0201" />
            <cluster id="0x0202" />
            <cluster id="0x0500"> <!-- ias zone -->
                <command id="0x00" passthrough="true"/> <!-- zone status change notification -->
                <command id="0x01" passthrough="true"/> <!-- zone enroll request -->
            </cluster>
            <cluster id="0x0b04" />
            <cluster id="0xFE11" passthroughAll="true"/> <!-- custom cluster example -->
        </clientClusters>
    </endpoint>
</deviceConfig>

...