Identify Start Command
| RapidHA Primary Header | 0x11 (General Cluster Frames) |
|---|---|
| RapidHA Secondary Header | 0x10 |
...
F1 11 10 DE 01 16 16 01 [RHAIdentifyStart]
Identify Stop Command
| RapidHA Primary Header | 0x11 (General Cluster Frames) |
|---|---|
| RapidHA Secondary Header | 0x11 |
...
F1 11 11 E3 01 16 1C 01 [RHAIdentifyStop]
On/Off Status Update
| RapidHA Primary Header | 0x12 (HA Cluster Frames) |
|---|---|
| RapidHA Secondary Header | 0x00 |
...
- (Indicating OFF) F1 12 00 DF 03 16 00 00 0A 01 [RHAOnOffStateUpdate]
Move to Level with On/Off Status
| RapidHA Primary Header | 0x12 (HA Cluster Frames) |
|---|---|
| RapidHA Secondary Header | 0x25 (note that this is different from the secondary header for the Move to Level command, which is 0x20) |
...
- (Indicating Level 100, Transition Time 0, On/Off Status ON) F1 12 25 BB 05 16 64 00 00 01 72 01 [RHAMoveToLevel]
Module Triggered Restore to Factory Defaults Command
...
| RapidHA Primary Header | 0x55 (Utility Frames) |
|---|---|
| RapidHA Secondary Header | 0x10 |
Expected Host Action
The If the product makes use of the pin for the Factory Reset Button, then this command is optional. The Restore Defaults frame is sent from the Host to the Module and serves to restore the Module to its factory default settings. The command has no payload.
...