Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

RapidConnect Desktop makes configuring attribute reports simple.

In the 'Binding' window, double click on one of the Binding Table entries (marked 1 below) to configure attribute reporting using that binding. If users have not set any bindings please see the Binding section of this guide.


Once a binding entry is double clicked the coordinator will execute attribute discovery on the target cluster → endpoint to discover attributes and also discover what attribute configuration are already registered on the source device.

Below is an example of a configurable attributes for the On/Off cluster. Configuring attributes for reporting uses the Configure Reporting Command (0x06)(see Zigbee Cluster Library Specification for more information).  

  1. Cluster Configure Reporting Tab: A new tab will be created for each cluster to be configured. Each attribute configuration for that cluster will be displayed in the Attribute Reporting Table.
  2. Attribute Reporting Table Entries: This section allows users to configure attribute reporting for reportable attributes. Example below for Attribute 0x0000 (on off) for the On/Off Cluster
    1. Attribute: Attribute to be configured
    2. Direction: The direction field specifies whether values of the attribute are to be reported, or whether reports of the attribute are to be received.
    3. Attribute DataType: Data type of attribute
    4. Min Reporting Interval: Minimum interval that reports shall be issued
    5. Max Reporting Interval: Maximum interval that reports shall be issued
    6. Timeout: Maximum expected time between reports
    7. Reportable Change: The reportable change field shall contain the minimum change to the attribute that will result in a report being issued.
    8. Reportable: Whether this attribute is reportable or not
    9. Status: Current Status of the attribute report entry, e.g Success, Fail, Not Found
    10. Actions: Available actions, e.g. Disable attribute reporting
  3. Configure For Reporting: This button will sent the Configure Reporting Command using the parameters set in the entry.

  • No labels

Legal Notices

Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.