Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

To operate the RapidConnect USB Stick with a Linux machine, a driver for the CP210x bridge chip is required. The driver is included in the following Linux kernel versions (and all subsequent versions):

  • v3.0.88 - longterm
  • v3.2.50 - longterm
  • v3.4.55 - longterm
  • v3.10.4 - longterm
  • v3.11-rc3 - stable
  • v3.12-rc1 – mainline
It can be found in the following directory:
linux-x.y.z\\drivers\\usb\\serial\\cp210x.c
Where x.y.z is the kernel version.

If the RapidConnect USB Stick module is not automatically supported for your kernel, contact MMB for additional instructions.

  • No labels

Legal Notices

Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.