- Created by Doug Alguire (Deactivated), last modified on Apr 25, 2019
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 28 Next »
This page includes the resources for hardware that is not recommended for new designs or has already passed its end-of-life. If you are building a new product based on RapidConnect hardware, see this page for the resources pertaining to our newest hardware.
- The Datasheet provides an overview of the electrical, mechanical, and RF characteristics of the hardware.
- The Eagle Library file (provided in both Eagle 5 and Eagle 6 format) contains an Eagle format "part library" including a schematic symbol of the module with pinouts and a PCB footprint ready to use. If you can access Eagle libraries, then you can drop this module into your schematic and PCB layout and wire it up.
- The Land Pattern Reference Gerber is a gerber version of the Eagle PCB footprint, containing 3 files:
- Module Silkscreen outline (slightly larger than actual module for placement purposes)
- Copper pads for the PCB to which the module will be assembled, based on our data sheet land pattern
- Solder mask recommendation showing a 3 mil clearance around all sides of copper pads (our data sheet doesn't call this out but it's what we recommend, based on IPC specs.
- The Module Pad and Drill Gerber is a reference partial gerber of the actual module, containing 3 files:
- Module outline (exact module perimeter)
- Excellon drill file showing where vias are located on the bottom side of the module
- Bottom side copper pads and copper around via drills where there is a risk of exposure/shorting to the PCB where the module is attached. We recommend that a PCB containing this module footprint should not have any vias under the module. If that is unavoidable, the designer should try to ensure there are no vias that would line up with these copper areas on the module, and of course obey the RF keep out zone (not shown in gerber but referenced in data sheet)
- The Application Circuits demonstrate the correct implementation of the Z357PA20 module in conjunction with a Host Microcontroller or USB Transceiver.
Module
| File | Modified | |
|---|---|---|
|
ZIP Archive BSB03PA1x GBR Package.zip |
Sept 07, 2017 by Doug Alguire (Deactivated) | |
| Nov 27, 2017 by Doug Alguire (Deactivated) | ||
|
Microsoft Powerpoint Presentation Soldering Instructions for Conducted RF Measurements - BSB03PA1X.pptx |
Apr 10, 2018 by Doug Alguire (Deactivated) | |
| Jun 25, 2018 by Doug Alguire (Deactivated) |
| File | Modified | |
|---|---|---|
| Aug 15, 2017 by Doug Alguire (Deactivated) | ||
| Aug 15, 2017 by Doug Alguire (Deactivated) | ||
|
PDF File Z357PA2x Reference Design (USB).pdf |
Aug 15, 2017 by Doug Alguire (Deactivated) | |
|
PDF File Z357PA2x Reference Design.pdf |
Aug 15, 2017 by Doug Alguire (Deactivated) | |
|
ZIP Archive Z357PA2x_Land_Pattern_Reference_Gerber.zip |
Aug 15, 2017 by Doug Alguire (Deactivated) | |
|
ZIP Archive Z357PA2x_Module_Pad_And_Drill_Via_Gerbers.zip |
Aug 15, 2017 by Doug Alguire (Deactivated) | |
|
PDF File MMB Networks Z357PA20 Z357PA21 EM357 ZigBee Module Specification v2.0_20160706.pdf |
Aug 15, 2017 by Doug Alguire (Deactivated) |
| File | Modified | |
|---|---|---|
|
PDF File RapidSE MMB Z357PA10 EM357 Module Specification v4_20141016.pdf |
Aug 15, 2017 by Doug Alguire (Deactivated) |
Gateway
USB Stick
Development Board
| File | Modified | |
|---|---|---|
|
PDF File MMB Networks RapidConnect Development Board Z357PA24-DEV Specification v2_0.pdf |
Aug 15, 2017 by Doug Alguire (Deactivated) |
- No labels