Pinout for Legacy Applications (Firebrand)
The content on this page applies to the RapidConnect Lighting firmware, v1.2.10 and earlier. If you are using RapidConnect Lighting & Sensor, refer to the Pinout page here.
Pinout and Hardware Design Notes
The following pinout is used in the RapidConnect Lighting firmware. The Z357PA40 module pad numbers are shown in brackets:
| Z357PA40 Module Pad | EM357 Pin | Function |
|---|---|---|
| 5 | PB3 | Relay Out |
| 6 | PB4 | PWM Out |
| 9 | PA5* | Network LED |
| 15 | PB2 | Zigbee Serial RX |
| 16 | PA6 | Button |
| 17 | PB1 | Zigbee Serial TX |
*A transistor circuit is required to ensure that this pin is held high at startup. This pin assignment will be changing. See the note below for more information.
PA5 Protection Circuit
Pin PA5 on the EM357 has a built-in function defined by Silicon Labs; if it is held low at startup, the EM357 will enter bootload mode. MMB is in the process of updating the pinout to use a different pin that is available on our new Z357PA40 module. Until the new firmware implementing a different pinout is released, it is necessary to add the “protection circuit” shown below. R1 and R2 must have the same resistance.
For more information about how to integrate the Z357PA40 module in your lighting product design, see the Hardware Design Resources page.
Legal Notices
Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.