/
Connecting Your Own Sensors or LED Drivers to the RapidConnect Lighting & Sensor Evaluation Board

Connecting Your Own Sensors or LED Drivers to the RapidConnect Lighting & Sensor Evaluation Board

Mar 21, 2018

The RapidConnect Lighting & Sensor Evaluation Board includes a "bypass" capability to disconnect the built-in sensors and buttons and instead connect directly to external sensors or LED drivers. The notes below show the external connections that can be configured using the jumpers on the Evaluation Board.

Available Dedicated External Connection - JP9, JP2, JP1

  • Illuminance Sensor (0-1.1V)

  • Ultrasonic Sensor (Active Low)

  • PIR Sensor (Active Low)

  • Relay Out (Active High)

  • PWM Out

  • Ground

  • 3.3V

Jumper Selections

Illuminance In - JP6

  1. Onboard Sensor

  2. Onboard Trimpot

  3. External 

Ultrasonic In - JP4

  1. Onboard Button

  2. External

PIR In - JP5

  1. Onboard Button

  2. External

Relay Out - J10

  1. Onboard LED

  2. External

PWM Out - J11

  1. Onboard LED

  2. External

Serial TX - J7

  1. Onboard USB Serial Controller

    1. Remove jumper for direct TX connection

Serial RX - J6

  1. Onboard USB Serial Controller

  2. Remove jumper for direct RX connection

Power - J8

  1. USB power from mini-USB Port

  2. Remove jumper for direct power connection

Legal Notices

Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.