Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 72 Next »

This page describes the commands supported by the RapidConnect serial protocol.

Serial Protocol commands are sent between the Host application and MMB Networks Module. The commands are then translated into Zigbee commands by the Module Firmware

If you are new to the RapidConnect Serial Protocol, get started by reviewing the Serial Protocol Overview guide.


To view this protocol offline, unzip the file below and open using your web browser

RapidConnect_SerialProtocolExport_30112017.html.zip

Sleep Consultant Packages

Serial Protocol Overview

Serial Protocol overview and architecture guide.

Zigbee Specification References

Provides useful zigbee specification reference data such as Data Types, Status Codes and Zigbee Device ID's.

Primary Headers

(0x55) Utility Frames

(0x01) Network Commissioning Frames

(0x02) Security Configuration Frames

(0x03) ZigBee Support Configuration Frames

(0x04) ZDO Message Frames

(0x05) ZCL Message Frames

(0x11) General Cluster Frames

(0x12) HA Clusters

(0x0B) Serial Bootload Frames

(0x0B) OTA Upgrade Client Frames

(0xB0) OTA Upgrade Server Frames

(0xD1) Diagnostic Frames

(0xDF) Manufacturing Library Frames


Change Log


RapidConnect 3.0.2

Frames Removed:

  • Trust Center Install Code Request
  • Trust Center Install Code Response
  • Bootloader Version Request
  • Bootloader Version Response

Updates to Existing Frames:

  • Module Info Response - Application Info enumerations modified
  • Module Info Response - Hardware Type field renamed to Hardware Version
  • Module Info Response - Hardware Version enumerations modified
  • Module Info Response - Bootloader Type enumerations modified
  • Status Response - Added MMB Unrecognized Command (0x13) to enumerations
  • Trust Center Security Policy Write - Added Incorrect Length (0x07) to Status Response enumerations
  • Trust Center Key Exchange Update - Key Exchange status enumerations expanded
RapidConnect 3.0.1

Frames added for Zigbee 3.0:

  • Trust Center Security Policy Write
  • Trust Center Security Policy Request
  • Trust Center Security Policy Response
  • Trust Center Key Exchange Status Update
  • Trust Center Removed Device Notification
  • Trust Center Install Code Add
  • Trust Center Install Code Request
  • Trust Center Install Code Response
  • Clear Trust Center Install Codes
  • Trust Center Install Code Max Count Request
  • Trust Center Install Code Max Count Response

Updates to existing frames to support BSB03PA1x modules:

  • Module Info Response - Hardware Type enumerations modified to include 0x05 = EFR32MG1B232F256GM32
  • Module Info Response - Bootloader Type enumerations modified to include 0x02 = Gecko Standalone Bootloader


  • No labels

Legal Notices

Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.