/
Using Web Sockets

Using Web Sockets

Oct 25, 2019

This page describes how to connect to a server running Intrepid Socket Server using RapidConnect Desktop.

Add Web Socket

  1. Click the "Connect to Web Sockets..." button (marked as 1 below), which will bring up the "Connect to Web Socket" dialog.

  2. Click "Add Web Socket" (marked as 2 below)

  3. Enter the hostname and port you'd like to connect to in the pop-up that appears.

  4. Click Ok

Connect to Web Socket

If an Intrepid Socket Server was detected at the address:port entered, you will see the EUI of the Module connected to the other side.

  1. Highlight the EUI of the Available Socket/Module

  2. The configuration details will be displayed in the Module Properties panel.

  3. Press Continue to proceed.

Conclusion

At this point, the Desktop will behave as if it is connected directly to the Module.

 

In This Space

 

Legal Notices

Copyright © 2020 MMB Networks, Inc. All rights reserved.
Confidential materials prepared and delivered by MMB Networks for receipt and review only by any partner subject to a valid and enforceable MMB Networks confidentiality agreement. Any receipt, review, or misuse of any of the content exchanged hereunder by any party not a party to this confidential exchange shall be subject to any and all rights available under the law. All rights, title and interest to the materials shall remain with MMB Networks.
Any suggestions provided to MMB Networks with respect to MMB Networks' products or services shall be collectively deemed “Feedback.” You, on behalf of yourself, or if you are providing Feedback on behalf of your employer or another entity, represent and warrant that you have full legal authority to bind such entity to these terms, agree to grant and hereby grant to MMB Networks a nonexclusive, perpetual, irrevocable, royalty free, worldwide license to use and otherwise exploit such Feedback within any MMB Networks products and services.